- 1. Outer Fabric
- 2. Breathable
- 3. Waterproof
- 4. Windproof
- 5. Waterproof coating
- 1. Outer fabric
- 2. Waterproof
- 3. Windproof
- 4. Coated backing
StormDri numeric mm indicates how many millimetres of water the fabric has been tested to withstand .
- 1. Outer Fabric
- 2. Inner Fabric
- 3. Evaporation
- 4. Wind resistant
- 5. Water repellent
- 1. Outer Fabric
- 2. Mid-layer - TPU waterproof, breathable & windproof membrane
- 3. Inner Fabric
- 4. Breathable
- 5. Windproof
- 6. Waterproof
Natulon Eco-Friendly Zippers
More about these zippers Here
perPETual© has developed a unique scalable technology to convert plastic bottles into high quality filament yarn.
Environmentally friendly materials made from recycled PET-bottles offering a sustainable equivalent to conventional yarns.
REPREVE® performance recycled fabric uses environmental-friendly materials made from recycled plastic bottles and post-industrial waste.
A high end chemical regeneration system using polyester chemical recycling technology taking waste polyester materials such as clothing and fabric leftovers as raw materials, reducing them to polyester thorough chemical decomposition, and weaving into fibres, resulting in a closed clothes to clothes cycle. Waste textiles can be regenerated repeatedly, so the use of petroleum resources and waste is reduced.
These bottles with differing numbers are found on each of our recycled and sustainable products representing the equivalanet number of 1 litre PET bottles used in the process of making the garment.
Cotton-free production avoids growing expensive, environmentally demanding crops without leaching high levels of pesticides and toxic chemicals into the earth and water supplies.
This garment contains recycled materials.
End of life recyclable
When you no longer need your garment, check its label, contact your local end-of-life textile options to upcycle, and give your garment a second life by preventing landfill. Where indicated, fabrics and trims are suitable for extraction and repurposing.
This garment is PFC-Free (Poly-Fluorinated Chemicals, man made, potentially harmful chemicals used predominantly in waterproof coatings).
Lightweight garment for more comfortable wear
This garment is breathable.
This garment is windproof
This garment is Showerproof
This garment is water resistant
This garment is stretchy
Eco-Friendly zippers recycled from PET bottles and other post-consumer materials using the latest technology.
This garment is suitable for transfer printing
This garment is suitable for embroidery
This garment is suitable for print
Print (not DTG)
This garment is suitable for print not including DTG
Garment is quick drying due to: special fibres ensure its fabric absorbs only 1% of its weight in moisture, which evaporates with movement in the air
Garment with tear away label to aid rebranding.
Cut Away Label
Garment with cutaway label for rebranding.
Garment with size only label to enable quick rebranding.
Ready To Brand
3M Thinsulate is an insulation made up of fine microfibers that work together to trap warm air molecules. As heat builds up from the body, Thinsulate effectively traps the warmth while allowing any moisture to evaporate through its outer membrane.
CARING FOR YOUR GARMENT
· Before washing, close all zips, undo buttons and flatten out collars and cuffs.
· Remove loose or sharp objects from pockets & lining.
· Turn garments inside out to reduce abrasion & fibre contamination from other garments during the washing cycle.
· Garments of similar colours can be machine washed together where stated on the care label.
· Do not overload the washing machine.
· Use the correct amount of detergent relative to how dirty the garments are.
· Check garments regularly for marks or stains and remove as soon as possible.
· Once printed, check with ink supplier that wash temperature still applies.
· Do not iron directly onto a printed garment. Turn inside out & iron the reverse.
· When ironing dark garments avoid 'iron shine' with a dry iron by ironing on the reverse side or through a damp cloth This is not applicable if using a steam iron.
RESULT® garments are designed to take decoration with hidden access points to allow for greater frame or platen purchase on outer fabric. Recommended decoration types are advised against each product.
Recommended decoration types have been tried independently and the recommendation given can be taken as an indication as to how the garment may perform.
Accuracy or completeness is not guaranteed so before use, the decorator must determine the suitability of the product for the decoration.
Printers in particular employ different techniques and use a variety of products so RESULT® does not take responsibility for third party decoration and always recommends testing before bulk decoration.
When garments can be printed onto any colour other than white, extreme caution must be observed. Due to the engineering of man-made materials, there is a high risk of colour migration through the ink film.
This may however be managed by experienced printers with the correct inks.
When suggesting digital transfers, customers are encouraged to seek advice from their digital media supplier, whether be it for full colour imagery or simple vinyl CAD cut transfers.
Contact RESULT® for further guidance.
For easy neutral or self-branding look for our tear away label:
All our measurements are “To Fit” body sizes and not the size of the actual garment itself.
Please measure your body as follows:
Men: Measure around the chest at its widest point.
Women: Measure around the fullest part of the bust and follow the conversion table below
Junior & Youth: Measure the fullest part of the chest and measure height from top of head down to floor without shoes
All: Measure round the natural waist ensuring the measuring tape is kept taught.
Men, Women & Unisex: Measure from the top of the inside leg down to the floor without shoes.
Women to fit the conversion: